Astral 100mm Aperture Calorimeters

Scientech's 100 mm aperture, volume absorbing and surface absorbing calorimeters measure average power up to 50W. Calibration data is stored in detector.

The surface absorbing models are ideal for measuring CW lasers while the volume absorbing models are designed for pulsed lasers using either the watts mode or single pulse energy mode.

This calorimeter requires use of an Astral Power Meter.

Model 360401S 380401S 380402S 384UV5S
Detector Calibration Data stored in detector stored in detector stored in detector stored in detector
Type of Absorber Surface Volume Volume Volume
Aperture Diameter 100mm (4") 100mm (4") 100mm (4") 100mm (4")
Minimum Beam Diameter 5cm 5cm 5cm 5cm
Spectral Response 250nm - 35µm 266nm - 1.2µm 9 -11µm 193nm - 360nm
Maximum Average Power, with full illumination of absorber 50W 50W 50W 50W
Minimum Average Power 150mW 150mW 150mW 150mW
Maximum Power Density 200W/cm²

27W/cm2 @1064nm

21W/cm2 @532nm

7.7W/cm2 @355nm

158mW/cm2@266nm

4W/cm² 50W/cm2 @355nm
Maximum Peak Power Density 1MW/cm²

90GW/cm2@1064nm

71GW/cm2 @532nm

27GW/cm2 @355nm

530MW/cm2@266nm

100MW/cm²

Repetitive pulses:    101MW/cm2@355nm

Single pulse:             3.5GW/cm2@355nm

Maximum Single Pulse Energy 150J 150J 150J 150J

Max Energy Density, J/cm2 =

Repetitive Pulses: (pulse width in sec)

1000 x (pulse width)1/2

to max of 200J/cm2

3.7J/cm2 @1064nm

2.9J/cm2 @532nm

1J/cm2 @355nm

20mJ/cm2 @266nm

4J/cm2 1.1J/cm2 @ 355nm

Max Energy Density, J/cm2 =

Single Pulse: (pulse width in sec)

1000 x (pulse width)1/2

to max of 200J/cm2

7J/cm2 @1064nm

5.6J/cm2 @532nm

2.1J/cm2 @355nm

41mJ/cm2 @266nm

4J/cm2 40J/cm2 @ 355nm 
Response Time 5 sec 5 sec 5 sec 5 sec
Dimensions D x L, cm 15.24 x 20.32 15.24 x 20.32 15.24 x 20.32 15.24 x 20.32
Compatible Meters

AI310, AI310D,

AI310D-USBL

AI310, AI310D,

AI310D-USBL

AI310, AI310D,

AI310D-USBL

AI310, AI310D,

AI310D-USBL

View as Grid List

4 Items

Set Descending Direction
per page